Dimensions and weight vary according to enclosure
Camera:
TV standard: B & W CCIR
Resolution: 420 TV lines
Sensitivity: 0.1 Lux (F2.0)
S/N Ratio: Better than 48db
Shutter control: Automatic 1/50 – 1/100,000
Pinhole lens: 3.7 mm standard (optional different lenses available)
Recording (configurable via PC software):
Storage medium: Removable Multi-Media Card, 8MB, 16MB, 32MB and 128MB are available.
Memory card reader: Sandisk Image MateTM and SCM Microsystems DazzleTM are currently supported.
Picture format: JPEG with automatic thumbnails support.
Picture quality options: Good, Great, Better and Best modes, from 5K up to 20K image sizes.
Recording rates: From three images per second to one image per five minutes.
Recording options: Fixed–Records fixed number of events until Multi-Media Card is full; and Cyclic–Continue recording from start when Multi-Media Card is full.
Delay time between motion activation triggers: 1 second to 999 seconds.
Number of images per event: 1 to 101 images.
Other software configurable features:
Video motion detector: Select active areas and sensitivity on grid
Audible signals enable: Beep upon arming, disarming and passcode entry
Filter images: Select images within certain time range
Remote control (infrared):
Functions Arm (ON), Disarm (OFF), Snapshot, Code (1,2,3,4)
Terminal Connectors and Switches:
External input: Isolated dry contact input.
Relay output: 1) 28VDC, 0.1A with 10ohm serial resistor, opens for 1.8 seconds upon detection – normally closed.
2) Control relay – normally open.
Video output: BNC connector
Power Supply:
Power consumption Typical – 1.25A @ 12 VDC
PC and Memory Card Reader Software and Requirements:
Minimum system requirements are as follows:
CPU: Pentium II 200Mhz or higher.
RAM: 16MB or higher.
Graphics adapter: Super VGA or higher.
Display resolution: 640x480, 16 bit or higher.
Operating systems: Windows 95, 98, 2000, ME or XP with Internet Explorer 5.0TM or higher.
Memory card reader: Multi Media Card (MMC) reader and software
